Ticker

6/recent/ticker-posts

Advertisement

Responsive Advertisement

Xcelerate Kernel for MIUI Build11 for Redmi 1s [Link Updated] [071215]


Xcelerate Custom Kernel for MIUI6 and MIUI7 is Developed by xda use kairi_zeroblade
Kernel Features The kernel is based on stock Xiaomi Source it gives you Good Battery life support custom Thermal Engine Custom Hotplug, Xiaomi KCAL [Advanced Color Control] these few modifications and additions are maximize the potential of our Redmi 1s.
How to Flash this Kernel
1. Download the zip
2. Put it in Internal Memory
3. Reboot into Recovery
4. Install then Flash the Zip
5. Wipe Cache/Dalvik and Reboot and wait.
Note to change cpu frequencies and other features of kernel use only Synapse App
[other will not work]
I Recommend you to flash build 7 
Note in Build 8 radio is not working and 
Build 9 is ok you can use it but,
Build 10 or 11 not as good as build 7, overnight battery drain is noted in build 11

Build 11 | Build 10 | Build 9

Build 8 | Build 7 | Build 5

Build 4 | Build 3 | Build 2

Build 1

Change-Log
Build11
Updates
Build10
Inline with new official Source drop from Xiaomi
Ramdisk fixes
Build9
Fixed some ramdisk stuff for MIUI
Fixes for Radio driver for MIUI
Build8
Fixed some ramdisk stuff
Patches from Armani Devs
You are required to wipe Dalvik/Art Cache on this release else you'll drop dead
Bug : Radio app not working
Build7
Update F2FS inline with Armani-Devs
Patches from Linux 3.4.y mainline
Bug : Screen flickering when brightness is low
Build6
New GCC5.2 Toolchain
Patches from Linux 3.4.y mainline and from Motorola
Build5
Update GCC5 headers from Mainline 4.0.y
New GCC5.2 Toolchain
Build4 
Thermal Cleanup and optimization
CONFIG: Disabled CC_STACKPROTECTOR to reduce the sizes a bit and make build leaner
Build3 
Few patches from Linux Mainline | TAMOD Audio controls cleanup | GPU boost/OC

kairi_zeroblade
Version Information
Status: Stable
Support kairi_zeroblade for his contribution. Main Thread

Post a Comment

43 Comments

  1. This comment has been removed by the author.

    ReplyDelete
  2. Hey bro could u plzz tell me that is build 8 more stable than build 5 ... As of now m on build 5 ... Because at the build 6 and build 7 release time u recommended us to use build 5 ... Plz reply

    ReplyDelete
    Replies
    1. Build 8 is more overclocked @1.7 i flashed build 8 and battery was draining reverted back to build5 you should stick with build5

      Delete
  3. Patched Build 8 Many Time On Global Beta 5.9.25 miui7 No UCI support .. I updated ROM and Kernel both same time .. Can't figure out where is the problem is!

    ReplyDelete
    Replies
    1. bro flash build 7 because radio is not working on build8

      Delete
  4. Hey bro ! I found a new kernel for redmi 1s miui 7 version ... Bro m posting the link plzzz check it & review it .. Is this kernel better than xcelerate kernel or not ... After ur review i 'll flash it here is the link :-
    en.miui.com/forum.php?mod=viewthread&tid=175659&extra=page%3D3&mobile=2

    ReplyDelete
  5. Replies
    1. yes it working perfectly with 5 hrs n more SOT

      Delete
  6. Can you make a kernel for redmi 1s which support overclocking upto 1.8 and gpu upto 600 . no problem for me about battery . I need performance

    ReplyDelete
    Replies
    1. i'm not developer so wish that kernel developers like kairi zeroblade will do this in future

      Delete
  7. I am not impressed by Build 9, standby drain of battery is there, old builds prior 7 were better

    ReplyDelete
    Replies
    1. yes they were better but they are from old kernel sources

      Delete
  8. my phone cannot be charged on Build 10, why?

    ReplyDelete
    Replies
    1. there is no bug like that hwever have you tried wipe dalvik cache and cache after flashing kernel

      Delete
  9. link build 10 eror 404 not found ,please reupload the file, thanks before

    ReplyDelete
  10. after updating to build 11 wifi button is not working

    ReplyDelete
  11. but when i come back to build 7 it is working fine.i do not know what is the problem for that.

    ReplyDelete
    Replies
    1. first revert back to original kernel by flashing original rom zip without wiping anything thn flash build 11 but for your knowledge build 11 have overnight battery drain problem so i recommend you to stick with build 7 it's best so far...

      Delete
  12. sir, if i update build 7 to build 9 , i must revert back to original kernel or not ?

    ReplyDelete
    Replies
    1. there is no problem you can flash build 9 over build 7

      Delete
  13. Please also review the miui global beta updates ... so we can choose a good build ... hope you will..

    ReplyDelete
  14. Which is the best kernel for miui7 v7.0.5.0

    ReplyDelete
  15. xcelerate is best we got for redmi 1s use build 11

    ReplyDelete
  16. in build 7 i m not able to reduce the cpu frequency even in synpase..it is showing some error..wat to do

    ReplyDelete
    Replies
    1. ignore error check whether frequencies are locked as per ur choice use cpu-z or kernel auditor to check

      Delete
  17. Installing Xcelerate kernel, can we update Roms via OTA normally without Bricking our Phone???

    ReplyDelete
  18. Hey, what do you mean by the fourth step -
    4. Install then Flash the Zip
    How do I do it? In the recovery mode it only gives the option to install update.zip file.

    ReplyDelete
    Replies
    1. Do in TWRP Recovery not MI-Recovery, this link will help "http://redmi1s-india.blogspot.com/2015/02/how-to-flash-twrp-recovery-in-redmi-1s.html"!

      Delete
    2. Do in TWRP Recovery not MI-Recovery, this link will help "http://redmi1s-india.blogspot.com/2015/02/how-to-flash-twrp-recovery-in-redmi-1s.html"!

      Delete
  19. How do i know the build number?

    ReplyDelete
  20. I am on build 5, shud I upgrade to 7 or just stay in it.....I need battery

    ReplyDelete
  21. I use build 7,but low light screen was flickring,is it any problem on mobile hardware and display ???

    ReplyDelete
  22. Guys its time for miui 8 http://redmi1s-india.blogspot.com/2016/06/miui-8-multi-rom-for-all-mi-devices.html

    ReplyDelete
    Replies
    1. Need ur help badly,please check ur message requests in your facebook profile.

      Delete
  23. why we should install Synapse app..... how ever we installed custom kernel...

    ReplyDelete
  24. I flashed build 7... Some times automatically restarting... How to solve this issue.....?

    ReplyDelete